6 Nail Gun Mistakes You Should Avoid | Brad Nailer Tips

Summary by Krater

The video demonstrates six common nail gun mistakes in woodworking—ranging from choosing the wrong gauge and nail length to incorrect compressor PSI settings, improper hole filling, and shooting nails out of the side—and explains how to avoid them for clean, strong joints.

From the video

Answers: What are common nail gun mistakes and how do I avoid them?

• nail gun mistakes and how to avoid them
• choosing the right nail gauge and size
• air compressor PSI settings for nailers
• nail hole filling techniques
• preventing nail blowouts in woodworking

What it concludes

• For face nailing, use a nail length 1/4 inch less than the combined board thickness to prevent blowing through.
• For edge nailing, use a nail length 2 to 3 times the thickness of the top board for maximum holding power.
• Always set your compressor PSI within the tool's rated range to avoid overdriving or underdriving nails.
• Use blue painter's tape over wood before filling nail holes to prevent putty or glue stains from ruining the finish.
• Shoot nails perpendicular to the material rather than in line with the grain to prevent blowouts out of the side of the board.